With the popularity of cars, cars have become irreplaceable for our traffic today, and road conditions have naturally become the navigation direction of owners. Car GPS positioning first when the owner of the road guide. GPS function must have three elements: GPS terminal, transmission network and monitoring platform. These three elements are indispensable; Through these three elements, it can provide vehicle positioning, anti-theft, anti-robbery, driving route monitoring and call command and other functions.

Recently many owner friends consulting tracking devices for cars that can be hidden buy back do not know how to install, please install the cost is too high. The effect is not satisfactory, and today our road marking technicians explain the installation steps of tracking devices for cars that can be hidden in detail:

First, buy a SIM card or data card and install it into tracking devices for cars that can be hidden.

Second.tracking devices for cars that can be hidden Before installation, first find the car circuit, under the center console, the steering wheel bottom to find the battery's normal wire and ACC control line. If you do not know which wire is what, then use a multimeter to measure, power off all the electricity in the car, and then use a wire a wire measurement, there is a voltage that is a regular wire. And that leads to the ACc line.

Third, after finding a good power supply, start to connect the line, use a utility knife, cut a notch on the two lines (not to break the line ah ~~ I am not responsible for breaking the GPS positive and negative terminals and ACC are connected. Wrap the joints with tape.

Attention:

When installing the GPS antenna in the car, do not have metal objects to block it

In the test, it is possible to have its own voltage with the device, then you have to find a way to find the voltage range of the device is DV12-24V

tracking devices for cars that can be hidden https://www.eelinktracker.com/Magnetic-GPS-Tracker/